WINDOWS - Route Command
From Wiki.IT-Arts.net
Route Syntax
route [/f] [/p] [<command> [<destination>] [mask <netmask>] [<gateway>] [metric <metric>]] [if <interface>]]
Route Print
To display the entire contents of the IP routing table, type :
C:\> route print
To display the routes in the IP routing table that begin with 10, type :
C:\> route print 10.*
Print IPv4 routing table :
C:\> route print -4
Route Add
Command Syntax
route add destination_network MASK subnet_mask gateway_ip metric_cost
Add Permanent Route
Add the -p flag :
route -p add 192.168.35.0 MASK 255.255.255.0 192.168.0.2
