ALCATEL - Save Configuration
From Wiki.IT-Arts.net
Backup the Configuration
The Alcatel switch work with two configurations: the working and the certified. Certified is considered to be the most reliable.
When the switch starts, if the working and the certified are not identical, it uses the certified. It then goes into certified mode and it is not possible to modify the configuration.
If at start -up the two configurations are identical, it uses the working.
To save the configuration, you must first save the Runnin-Config in the Working. Then the working in the certified.
copy running-config working
puis
copy working certified
Ou bien il est possible de sauvegarder en une seule commande :
write memory flash-synchro
Display Configuration's Configuration
To see on wich configuration the switch is running :
show running-directory
Display The Full Configuration
show configuration snapshot all