ALCATEL - Show MAC Addresss

Platforms Supported :
OmniSwitch 6400, 6850, 6855, 6850E, 9000E

show mac-address-table

Displays Source Learning MAC Address Table information.

show mac-address-table [permanent | learned | quarantined] [mac_address] [slot slot | slot/port] [link-
agg link_agg] [vid | vid1-vid2]

Syntax Definitions

• permanent
  • Display static MAC addresses with a permanent status.

• learned
  • Display dynamically learned MAC addresses.

• quarantined
  • Display MAC addresses quarantined by the Quarantine Manager and Remediation (QMR) application.

• mac_address
  • Enter a MAC Address (e.g., 00:00:39:59:f1:0c).

• slot
  • Enter the slot number for a module to specify that the command should include all ports on that module (e.g., 6 specifies all ports on the module found in slot 6 of the switch chassis).

• slot/port
  • Enter the slot number and the physical port number on that module (e.g., 3/1 specifies port 1 on slot 3).

• link_agg
  • Enter a link aggregate ID number (0–31). See gation Commands."

• vid
  • A single VLAN ID number (1–4094).

• vid1-vid2
  • A range of VLAN IDs that you want to configure (e.g. 10-12 specifies VLANs 10, 11, and 12).

Defaults

By default, information is displayed for all MAC addresses contained in the table.

Usage Guidelines

• Note that only one VLAN entry—a single VLAN ID or a range of VLAN IDs— is allowed with this

command. Multiple entries are not accepted.

• If a static MAC address is configured on a port link that is down or disabled, an asterisk appears to the

right of the MAC address in the show mac-address-table command display. The asterisk indicates that this is an invalid MAC address. When the port link comes up, however, the MAC address is then considered valid and the asterisk no longer appears next to the address in the display.

Source : OmniSwitch CLI Reference Guide

Show ARP

Displays the ARP table. The ARP table contains a listing of IP addresses and their corresponding transla- tions to physical MAC addresses.

show arp [ip_address | hardware_address]

Syntax Definitions

• ip_address
  • IP address of the entry you want to view.

• hardware_address
  • MAC address of the entry you want to view.

Example :

> show arp

Total 4 arp entries
Flags (P=Proxy, A=Authentication, V=VRRP)

IP Addr Hardware Addr Type Flags Port Interface Name
-----------------+-------------------+----------+-------+--------+-----------+----------
172.16.21.1 24:be:05:2e:cd:00 DYNAMIC 1/47 vlan 221
172.16.21.45 e8:e7:32:52:38:34 DYNAMIC 0/12 vlan 221
172.16.21.59 e8:e7:32:33:eb:52 DYNAMIC 0/26 vlan 221
172.16.21.63 e8:e7:32:53:6d:78 STATIC UNKNOWN vlan 221

Output Definitions

• IP Address
  • Device IP address.

• Hardware Addr
  • MAC address of the device that corresponds to the IP address.

• Type
  • Indicates whether the ARP cache entries are dynamic or static.

• Flags Indicates the type of entry:
  • P = Proxy
  • A = Authentication (AVLAN)
  • V = VRRP

show bridge address-table

The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-forwarding database.

Related Commands : 'show ports security addresses'

Syntax

show bridge address-table [vlan vlan] [ethernet interface | port-channel
port-channel-number]

Parameters

• vlan
  • Specifies a valid VLAN, such as VLAN 1.

• interface
  • A valid Ethernet port.

• port-channel-number
  • A valid port-channel number.

Command Mode

Privileged EXEC mode.

Command Usage

• • Internal usage VLANs (VLANs that are automatically allocated on ports with a

defined Layer 3 interface) are presented in the VLAN column by a port number and not by a VLAN ID.

• • "Special" MAC addresses that were not statically defined or dynamically

learned are displayed in the MAC address table. This includes, for example, MAC addresses defined in ACLS.

Usefull Links

• https://www.alcatelunleashed.com/
• https://www.manualslib.com/manual/354051/Alcatel-Lucent-Omniswitch-6850-48.html
• https://www.manualslib.com/manual/356427/Alcatel-Os-Ls-6224.html
• https://support.alcadis.nl/Support_files/Alcatel-Lucent/OmniSwitch//OS6900/Manuals/OS6900%20AOS%207.2.1%20R01/OS6900%20AOS%207.2.1%20R01%20CLI%20Reference%20Guide.pdf