ALCATEL - Show Interface Tranceiver
From Wiki.IT-Arts.net
Platforms Supported :
Alcatel OmniSwitch 6400, 6850, 6850E, 6855, 9000E
show interfaces transceiver
Displays the DDM information for the specified transceivers.
show interfaces [slot | slot/port[-port2]] transceiver [ddm | w-low | w-high | a-low | a-high | actual]
Syntax Definitions :
- slot
- The slot number for a specific module.
- slot/port[-port2]
- The slot and port number (3/1). Use a hyphen to specify a range of ports (3/1-3/10).
- ddm
- Displays the administrative and trap status of the DDM feature.
- w-low
- Displays the Warning Low threshold for temperature, voltage, current, RX power and TX power.
- w-high
- Displays the Warning High threshold for temperature, voltage, current RX power and TX power.
- a-low
- Displays the Alarm Low threshold for temperature, voltage, current RX power and TX power.
- a-high
Displays the Alarm High threshold for temperature, voltage, current RX power and TX power.
- actual
- Displays the Actual values for temperature, voltage, current RX power and TX power.
- Defaults***
- By default, information is displayed for all ports on all modules and for all DDM parameter options.***
- Defaults***
Usage Guidelines
- Transceiver DDM capability will vary based on the transceiver manufacturer.
- Enter a slot number to display information for all interfaces on a specific slot.
- Enter a slot and port number or a range of port numbers to display information for a specific interface or a range of interfaces.
