MIKROTIK - batch-create-vlan.sh
From Wiki.IT-Arts.net
#!/bin/bash # # # GENERATE MIKROTIK TRUNK VLAN CONFIGURATION # # ##### VARIABLES # TRUNK INTERFACE INTERFACE="bond0" # VLAN RANGE TO CREATE VLAN_SEQUENCE="seq 2400 2499" ##### CREATE ALL BRIDGES for i in `$VLAN_SEQUENCE`; do echo "interface bridge add ageing-time=5m arp=enabled arp-timeout=auto auto-mac=yes comment=BRIDGE_VLAN_"$i" disabled=no fast-forward=yes forward-delay=15s igmp-snooping=no max-message-age=20s mtu=1500 name=bridge_vlan_"$i" protocol-mode=rstp transmit-hold-count=6 vlan-filtering=no" done ##### CREATE ALL VLANS INTERFACES for i in `$VLAN_SEQUENCE`; do echo "interface vlan add arp=proxy-arp disabled=no loop-protect=on mtu=1500 name="$INTERFACE"_vlan_"$i" use-service-tag=yes interface=$INTERFACE vlan-id="$i" comment="$INTERFACE"_VLAN_"$i done ##### ATTACH ALL VLANS TO BRIDGES for i in `$VLAN_SEQUENCE`; do echo "interface bridge port add auto-isolate=no bridge=bridge_vlan_"$i" broadcast-flood=yes comment=VLAN_"$i" disabled=no edge=auto frame-types=admit-all horizon=none ingress-filtering=no interface="$INTERFACE"_vlan_"$i" internal-path-cost=10 learn=auto path-cost=10 point-to-point=auto restricted-role=no restricted-tcn=no unknown-multicast-flood=yes unknown-unicast-flood=yes" done exit 0