ALCATEL - Show Interface Tranceiver

Platforms Supported :
Alcatel OmniSwitch 6400, 6850, 6850E, 6855, 9000E

show interfaces transceiver

Displays the DDM information for the specified transceivers.

show interfaces [slot | slot/port[-port2]] transceiver [ddm | w-low | w-high | a-low | a-high | actual]

Syntax Definitions :

• slot
  • The slot number for a specific module.

• slot/port[-port2]
  • The slot and port number (3/1). Use a hyphen to specify a range of ports (3/1-3/10).

• ddm
  • Displays the administrative and trap status of the DDM feature.

• w-low
  • Displays the Warning Low threshold for temperature, voltage, current, RX power and TX power.

• w-high
  • Displays the Warning High threshold for temperature, voltage, current RX power and TX power.

• a-low
  • Displays the Alarm Low threshold for temperature, voltage, current RX power and TX power.

• a-high
  • Displays the Alarm High threshold for temperature, voltage, current RX power and TX power.

• actual
  • Displays the Actual values for temperature, voltage, current RX power and TX power.

Defaults

By default, information is displayed for all ports on all modules and for all DDM parameter options.

Usage Guidelines

• Transceiver DDM capability will vary based on the transceiver manufacturer.

• Enter a slot number to display information for all interfaces on a specific slot.

• Enter a slot and port number or a range of port numbers to display information for a specific interface or a range of interfaces.

Usefull Links

• https://www.manualslib.com/manual/354051/Alcatel-Lucent-Omniswitch-6850-48.html?page=152