FORTIGATE - Packet Debug Flow

Quick Example

To stop all other debug and clear the filter, type :

diag debug flow trace stop
diag debug flow filter clear

The following example shows the flow trace for a device with an IP address of W.X.Y.Z :

diagnose debug enable
diagnose debug flow filter addr W.X.Y.Z
diagnose debug flow show function-name enable
diagnose debug flow trace start 100

Diagnose Debug Flow Command

To start flow monitoring with a specific number of packets :

diagnose debug flow trace start <N>

To stop flow tracing at any time :

diagnose debug flow trace stop

To follow packet flow by setting a flow filter:

# diagnose debug flow {filter | filter6} <option>

• Enter filter if your network uses IPv4.

• Enter filter6 if your network uses IPv6.

Replace <option> with one of the following variables:

Variable Description :

addr		IPv4 or IPv6 address
clear		clear filter
daddr		destination IPv4 or IPv6 address
dport		destination port
negate		inverse IPv4 or IPv6 filter
port		port
proto		protocol number
saddr		source address
sport		source port
vd		index of virtual domain; -1 matches all

Example

Sample output: IPsec (policy-based)

id=20085 trace_id=1 msg="vd-root received a packet(proto=1, 10.72.55.240:1->10.71.55.10:8) from internal."
id=20085 trace_id=1 msg="allocate a new session-00001cd3"
id=20085 trace_id=1 msg="find a route: gw-66.236.56.230 via wan1"
id=20085 trace_id=1 msg="Allowed by Policy-2: encrypt"
id=20085 trace_id=1 msg="enter IPsec tunnel-RemotePhase1"
id=20085 trace_id=1 msg="encrypted, and send to 15.215.225.22 with source 66.236.56.226"
id=20085 trace_id=1 msg="send to 66.236.56.230 via intf-wan1“
id=20085 trace_id=2 msg="vd-root received a packet (proto=1, 10.72.55.240:1-1071.55.10:8) from internal."
id=20085 trace_id=2 msg="Find an existing session, id-00001cd3, original direction"
id=20085 trace_id=2 msg="enter IPsec ="encrypted, and send to 15.215.225.22 with source 66.236.56.226“ tunnel-RemotePhase1"
id=20085 trace_id=2 msgid=20085 trace_id=2 msg="send to 66.236.56.230 via intf-wan1"

Usefull Links

FortiOS 6.2.12 Cookbook / FortiOS 7.4.3 Administration Guide

• https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/54688/debugging-the-packet-flow
• https://docs.fortinet.com/document/fortigate/6.2.12/cookbook/54688/debugging-the-packet-flow
• https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connectivity/ta-p/192560