ESXI - Base Commands: Difference between revisions

From Wiki.IT-Arts.net
imported>Z
(Created page with "Category:Post-It Dealing with EsXi CLI... == Show Routes == <nowiki> esxcli network ip route ipv4 list</nowiki> == Show Interfaces and Subnet Masks == <nowiki>...")
 
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 2: Line 2:


Dealing with EsXi CLI...
Dealing with EsXi CLI...
== Show Interfaces and Subnet Masks ==
<nowiki>
esxcli network ip interface ipv4 get</nowiki>




Line 12: Line 19:




== Show Interfaces and Subnet Masks ==
 
== Show Interfaces ==
 
The command below will show the physical status of the interface including if the link is up, the MAC address, and speed of the interfaces :
 
<nowiki>
esxcfg-nics -l</nowiki>
 
Or installed network adapters :


  <nowiki>
  <nowiki>
esxcli network ip interface ipv4 get</nowiki>
esxcli network nic list</nowiki>






== Netcat in EsXi ==
== Show Interfaces MAC Addresses ==


  <nowiki>
  <nowiki>
nc -w <timeout-in-seconds> -z <destination-ip> <destination-port>
esxcli network ip interface list</nowiki>






== Show Interfaces MAC Addresses ==
== Show Active Network Connections ==


  <nowiki>
  <nowiki>
esxcli network ip interface list
esxcli network ip connection list</nowiki>




Line 40: Line 55:




== Show Interfaces ==
== Netcat in EsXi ==


The command below will show the physical status of the interface including if the link is up, the MAC address, and speed of the interfaces :
The 'nc' or Netcat command in Linux is a networking utility for reading from and writing to network connections using TCP or UDP :


  <nowiki>
  <nowiki>
esxcfg-nics -l</nowiki>
nc -w <timeout-in-seconds> -z <destination-ip> <destination-port></nowiki>




Line 62: Line 77:
esxcli network ip dns server list
esxcli network ip dns server list
   DNSServers: 80.67.169.12, 80.67.169.40</nowiki>
   DNSServers: 80.67.169.12, 80.67.169.40</nowiki>
== Show VLAN ==
Type the following command in the console :
<nowiki>
esxcfg-vswitch -l</nowiki>
Alternatively, in the vMA appliance, type the vicfg-vswitch command—the output is similar for both commands:
<nowiki>
vicfg-vswitch –l</nowiki>
== Show SNMP ==
<nowiki>
esxcli system snmp get</nowiki>
== Show Virtual Switches And Port Groups: ==
<nowiki>
esxcli network vswitch standard list</nowiki>
== Show Firewall Status and Rule Settings ==
<nowiki>
esxcli network firewall get
esxcli network firewall ruleset list</nowiki>
== Show SMART ==
List storage devices :
<nowiki>
esxcli storage core device list</nowiki>
Get SMART score :
<nowiki>
esxcli storage core device smart get -d naa.XXXXXXXXXXXXXXX</nowiki>

Latest revision as of 10:29, 9 June 2024


Dealing with EsXi CLI...


Show Interfaces and Subnet Masks

esxcli network ip interface ipv4 get


 Show Routes

esxcli network ip route ipv4 list



Show Interfaces

The command below will show the physical status of the interface including if the link is up, the MAC address, and speed of the interfaces :

esxcfg-nics -l

Or installed network adapters :

esxcli network nic list


Show Interfaces MAC Addresses

esxcli network ip interface list


Show Active Network Connections

esxcli network ip connection list


Show ARP Table

esxcli network ip neighbor list


Netcat in EsXi

The 'nc' or Netcat command in Linux is a networking utility for reading from and writing to network connections using TCP or UDP :

nc -w <timeout-in-seconds> -z <destination-ip> <destination-port>


Show DNS Search Domain

esxcli network ip dns search list
   DNSSearch Domains: example.net


Show DNS Server List

esxcli network ip dns server list
   DNSServers: 80.67.169.12, 80.67.169.40


Show VLAN

Type the following command in the console :

esxcfg-vswitch -l

Alternatively, in the vMA appliance, type the vicfg-vswitch command—the output is similar for both commands:

vicfg-vswitch –l


Show SNMP

esxcli system snmp get


Show Virtual Switches And Port Groups:

esxcli network vswitch standard list


Show Firewall Status and Rule Settings

esxcli network firewall get

esxcli network firewall ruleset list


Show SMART

List storage devices :

esxcli storage core device list

Get SMART score :

esxcli storage core device smart get -d naa.XXXXXXXXXXXXXXX